Ethiopian Herald(Jan 13, 2026)

RE-BID ANNOUNCEMENT FOR The SUPPLY of Agricultural Machineries and Equipment for West Gondar Zone, Gendawhua affitt Refugee Site.

Innovative Humanitarian Solutions (IHS) was established in 2013. It was registered with charity & Society authority in accordance with Charities and Societies proclamation No. 621/2009 on June 25, 2013 with certificate bearing number 3075. Ever since it’s established in 2013 in Ethiopia, IHS has been engaged in a wide range of poverty reduction and develop nent activities and becoming one of the few, charity organization in the country.

IHS now invite sealed bids from all eligible bidders that are qualified, technically competent and have valid license for current Ethiopian FY 2018/2026 for the Supply of Agricultural Machineries and Equipment for West Gondar Zone, Gendawhua affitt Refugee Site, as per the following item and Specification: –

1/ Agricultural Machineries

S/N

Description

Specifications

Unit

QTY

1

 

Tractor

 

127HP Rated Power, 4WD, Rops with Sunroof Canopy.

No

 

2

 

2. Tractor Attachments and Implements

2.1

Box Blades

 
  • Compatibility: -For Agricultural tractor, 3-point linkage category II, suitable for 4WD.
  • Working Width: -2.1m- 2.4m must cover tractor tyre tracks.
  • Weight: – Heavy Enough for good cutting
  • Cutting Blade: – Double Cutting Edges, Blade Thickness 10-12mm
  • Scarifiers (Rippers): – Farm Type
  • Side Panels (Box Walls): – Hight 45-60cm and thickness 5-8mm.
  • Frame & Build: – Reinforced box frame, Wear plates at bottom edges, Corrosion- resistant agricultural Paint.
  • Working Depth: – Adjustable to about 200-250mm, Controlled by top links and tractor Hydraulics.

No

 

1

2.2

Disc Harrows

 

Number of disks 28, Transport Wheel with hydraulic lifting, Shock absorbing Springs, working with 323cm, Disk space 23cm, Hp requirement 100-130HP

No

 

1

2.3

Augers
  • Machine Type: – Tractor mounted earth auger/post hole digger.
  • Tractor Compatibility: – suitable tractor power 110-140hp, Hydraulic compatibility
  • Auger size and Capacity: – Auger diameter options 200mm-600mm, Auger length 1.0m-1.5m, maximum drilling depth 1.5m, capable of operating in clay, loam and sandy soils.

No

 

1

2.4

Quick Hitches

 
  • Description: – three-point quick hitch coupler system for rapid attachment and detachment of tractor mounted implements.
  • Tractor Compatibility; – suitable for tractor power 110-140Hp, three-point linkage category, design for heavy-duty field implements.
  • Structure and Material: – High -strength structural steel construction, Corrosion- resistant industrial powered coating.

No

 

1

2.5

Tillers

 
  • Equipment Description: – Heavy duty tractor mounted rotary tiller.
  • Tractor Compatibility: – Suitable for 110-140Hp, mounting 3-point linkage cat-egory.
  • Working Width: –2.2m-3.0m
  • Adjustable Working depth: – 120-220mm
  • Frame and Construction: – Robust welded Steel frame, anti-corrosion paint pow-No der coating.
  • Performance: – suitable for primary and secondary tillage, capable of operating in clay, loam, and sandy soils.

No

 

1

2.6

Tractor Loaders

 
  • Equipment Description: – Medium duty front-end loader attachment for agricul- tural purpose suitable for material handling.
  • Tractor Compatibility: – 110-140hp compatible with tractor Chassis and hydraulic system.
  • Bucket/Attachment: – Standard bucket included 1.0-1.5 m3
  • Bucket Construction: – Heavy duty steel with wear resistant cutting edge, Suitable for lifting hay bales, soil, fertilizer

No

 

1

2.7

Tractor Trailers
  • Equipment Description: – Heavy duty agricultural trailer suitable for hauling crops, fertilizers, or farm equipment.
  • Trailer Loading Capacity: – 3-5 tons.
  • Body Construction: – High-strength steel or reinforced sheet metal, side walls mini- No mum 0.5-1m hight, floor reinforced steel plate, anti-corrosion coating/powder coat- ing for durability.
  • Axles & Wheels: – Heavy-duty tandem or single axle. Tyres agricultural type.

 

 

 

 

 

No

 

 

 

 

 

 

1

3

Electric Powered Grinding Mill with all installation costs of masonry work and transportation.

 
  • Application; – Capable of producing fine Flour and Coarse Meal.
  • Type of Mill: – Hammer Millor Disc Mill, Electric Powered.
  • Capacity: –26HP
  • Motor Power: – 20HP or 15 KW, Voltage 400V or 415V three phase, Frequency 50Hz, Motor protection Overload and Overheating.
  • Construction: – Grinding Chamber Stainless Steel, Frame Heavy-duty Steel con- struction, Rust-resistant and coating. Hooper feed with guard, Discharge Bagging outlet or cyclone separator, Dust control Mechanism preferred.

 

 

 

No

 

 

 

 

3

4

Three-wheelers

 
  • Type: – Three-Wheeler with a seating capacity for three passengers plus the driver.
  • Engine Displacement: – 200cc engine producing 7.6 Kw power and 17Nm torque.
  •  Dimension & Weight: – 2000 mm wheelbase, and a 2635 mm length, 1300 mm width, and 1710 mm height. It has a 200 mm ground clearance and an 8-liter fuel tank.

 

 

 

No

 

 

 

 

6

5

Three-wheeler with trailer with a loading capacity of 500 Kg.

 
  • Type -Four stroke, air & oil cooled
  • Displacement-236cc
  •  Clutch-Wet, multiplate
  • Max Power -10.5 Ps @4500 rpm.
  •  Max Speed -58 KM/HR
  • MaxTorque-19Nm @ 3500rpm
  • Front Brakes Type – Hydraulically actuated brake shoes – Leading & Trailing Type.
  • Rear Brakes Type -Hydraulic expanding friction shoe – Leading Trailing Type.
  •  Fuel Tank -12 L
  • Ground Clearance -190 mm
  • Kerb Weight -475 Kgs Length x Width x Height -3230 mm x 1493 mm x 1818 mm.
  •  Suspension Front -Fork with Leading arms and Anti-dive link, twin hydraulic shock absorbers and helical springs.
  • Suspension Rear -Independently sprung rear wheels by trailing arms with helical springs and hydraulic shock  absorbers Wheel Base -2125 mm

 

 

 

 

 

 

 

 

No

 

 

 

 

 

 

 

 

 

6

Bidders are required to submit copies of all eligible documents and license on supply of the above industry issued under commercial registration and business license.

Bidding will be conducted through an open competitive tender process.

You may obtain further information from the Innovative Humanitarian Solution. Innovative Humanitarian Solutions

Address 1; Location Addis Ababa
City – Addis Ababa
Sub city Bole 05, Opposite to Gibson school
Telephone-0116682196/0913495623

The complete set of bidding documents in English for the aforementioned activities can be obtained from IHS Addis Ababa during working hours from Dec 8, 2025 to Dec 14, 2025.

Time line of opening the bid

Line

Item

Date

1

ITT published

13th-January-2026

2

Closing date for clarifications

16th-January-2026:4:00P.M East African Time

3

Closing date and time for receipt of Tenders

19th -Jan-2026: 4:00 PM East African Time

4

Tender Opening Date and time

20th-Jan-2026: 2:00 PM East African Time

5

Tender Opening Location

Addis Ababa, Ethiopia, I H S Head office.

At the address mentioned above. The prospective bidder shall present his/her company’s name and signing to acknowledge receipt of the bid documents. Bid should be submitted to the mentioned address on or before 11:00A.M. January 19, 2026.

Late submission of bides will not be accepted. Bids will be opened 2:00 PM Tuesday, Jan 20, 2026 in the presences of bidders and their representatives. Delivery Location: – West Gonder Zone/Gendawuha Affitt Refugee Site.

Innovative Humanitarian Solutions reserves the right to reject any or all bids accordingly

Innovative Humanitarian Solutions

{ document.querySelectorAll(selector).forEach(el => { if (el.closest('#job-detail-content')) { el.style.display = 'none'; } }); }); // Also hide the action buttons const actions = document.querySelector('.job-actions'); if (actions) actions.style.display = 'none'; // Restore after printing (attach listener BEFORE calling print) window.addEventListener('afterprint', function restore() { selectorsToHide.forEach(selector => { document.querySelectorAll(selector).forEach(el => { el.style.display = ''; }); }); if (actions) actions.style.display = ''; window.removeEventListener('afterprint', restore); }, { once: true }); // Now trigger the print dialog window.print(); } function downloadJobPDF() { printJobDetails(); }